Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING ECU(for TMT Made) › 2017.10–2018.01
RM30M0E _55 Steering _017103 POWER ASSIST SYSTEMS _0333488 POWER STEERING ECU(for TMT Made) A

POWER ASSIST SYSTEMS  POWER STEERING ECU(for TMT Made)  INSTALLATION  


PROCEDURE

Hide 89650 1.INSTALL POWER STEERING ECU ASSEMBLY

a.

Install the power steering ECU assembly to the instrument panel reinforcement assembly with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Engage the clamp to install the wire harness to the power steering ECU assembly.


c.

Connect the 4 connectors to the power steering ECU assembly.


Hide 55302A 2.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 3.PERFORM TORQUE SENSOR ZERO POINT CALIBRATION