1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD
45130
2.REMOVE HORN BUTTON ASSEMBLY
45100
3.REMOVE STEERING WHEEL ASSEMBLY
| *a | Matchmark |
Remove the steering wheel set nut.
Put matchmarks on the steering wheel assembly and the steering main shaft.
Disconnect all the connectors from the spiral cable sub-assembly.
| *a | Hold |
| *b | Turn |
Using SST, remove the steering wheel assembly.
Apply a small amount of grease to the threads and tip of SST (center bolt) before use.
45116
4.REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)
Remove the 2 screws.
Disengage the 4 claws, 2 pins and 2 guides and remove the No. 1 steering wheel ornament.
84250A
5.REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)
84610F
6.REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)
7.REMOVE STEERING SHAKE DAMPER (w/ Steering Shake Damper)
Remove the 2 screws and steering shake damper.
45184
8.REMOVE LOWER STEERING WHEEL BOSS COVER
Disengage the 6 claws and remove the lower steering wheel boss cover.