Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING ECU(for TMMIN Made) › 2017.10–2018.01
RM30M0E _55 Steering _017103 POWER ASSIST SYSTEMS _0333484 POWER STEERING ECU(for TMMIN Made) A

POWER ASSIST SYSTEMS  POWER STEERING ECU(for TMMIN Made)  INSTALLATION  


PROCEDURE

Hide 89650 1.INSTALL POWER STEERING ECU ASSEMBLY

a.

Install the power steering ECU assembly to the instrument panel reinforcement assembly with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Engage the 2 clamps to install the wire harness to the power steering ECU assembly.


c.

Connect the 4 connectors to the power steering ECU assembly.


Hide 55432B 2.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

Hide 55606 3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 4.PERFORM TORQUE SENSOR ZERO POINT CALIBRATION