55046A
1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
55045A
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
Use the same procedure as for the RH side.
33504F
3.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
Turn the shift lever knob sub-assembly counterclockwise to remove the shift lever knob sub-assembly.
33504F
4.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
Turn the shift lever knob sub-assembly counterclockwise to remove the shift lever knob sub-assembly.
58804A
5.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for CVT)
Move the shift lever to N.
Disengage the 2 claws and 6 clips to remove the upper console panel sub-assembly.
Disconnect the connector.
58821C
6.REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)
Disengage the 2 claws and 6 clips to remove the upper console panel.
Disengage the 6 claws to remove the shifting hole cover sub-assembly.
58921A
7.REMOVE REAR CONSOLE UPPER PANEL
Disengage the 8 clips to remove the rear console upper panel.
Disconnect the connector.
58815C
8.REMOVE CONSOLE BOX CARPET
Remove the console box carpet.
58910C
9.REMOVE REAR CONSOLE BOX ASSEMBLY
Remove the 3 bolts.
Disengage the 2 clips to remove the rear console box assembly.