Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR CONSOLE BOX(for Separate Type) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017120 INTERIOR PANELS / TRIM _0333992 REAR CONSOLE BOX(for Separate Type) A

INTERIOR PANELS / TRIM  REAR CONSOLE BOX(for Separate Type)  INSTALLATION  


PROCEDURE

Hide 58910C 1.INSTALL REAR CONSOLE BOX ASSEMBLY

a.

Engage the 2 clips to install the rear console box assembly.


b.

Install the 3 bolts.


Hide 58815C 2.INSTALL CONSOLE BOX CARPET

a.

Install the console box carpet.


Hide 58921A 3.INSTALL REAR CONSOLE UPPER PANEL

a.

Connect the connector.


b.

Engage the 8 clips to install the rear console upper panel.


Hide 58804A 4.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for CVT)

a.

Connect the connector.


b.

Engage the 2 claws and 6 clips to install the upper console panel sub-assembly.


c.

Move the shift lever to P.


Hide 58821C 5.INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)

a.

Engage the 6 claws to install the shifting hole cover sub-assembly.


b.

Engage the 2 claws and 6 clips to install the upper console panel.


Hide 33504F 6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)

a.
B487633

Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.


Hide 33504F 7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

a.
B487634

Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.


Hide 55046A 8.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

Hide 55045A 9.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the RH side.