55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55432B
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
55550
3.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
55902C
4.REMOVE AIR CONDITIONING PANEL SUB-ASSEMBLY
Disengage the 5 clips and remove the air conditioning panel sub-assembly.
55900A
5.REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY
Disengage the 4 claws and remove the heater control and accessory assembly.
Disengage the clamp and separate the air inlet damper control cable sub-assembly.
Disengage the claw and remove the cable ring from the air inlet damper control link.
Disengage the clamp and separate the defroster damper control cable sub-assembly.
Disengage the claw and remove the cable ring from the defroster damper control link.
Disengage the clamp and separate the air mix damper control cable sub-assembly.
Disengage the claw and remove the cable ring from the air mix damper control link.
55906A
6.REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
Spread the claws and pull out the outer cable.
Disengage the claw and remove the defroster damper control cable sub-assembly.
55908A
7.REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
Spread the claws and pull out the outer cable.
Disengage the claw and remove the air inlet damper control cable sub-assembly.
55909C
8.REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
Spread the claws and pull out the outer cable.
Disengage the claw and remove the air mix damper control cable sub-assembly.