55909C
1.INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
Engage the claw.
Pull out the inner cable from the outer cable, and pass it through the outer clamp case.
Insert the outer cable into the outer clamp case.
Check that a clicking sound can be heard.
55908A
2.INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
Engage the claw.
Pull out the inner cable from the outer cable, and pass it through the outer clamp case.
Insert the outer cable into the outer clamp case.
Check that a clicking sound can be heard.
55906A
3.INSTALL DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
Engage the claw.
Pull out the inner cable from the outer cable, and pass it through the outer clamp case.
Insert the outer cable into the outer clamp case.
Check that a clicking sound can be heard.
55900A
4.INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY
Engage the claw and install the cable ring to the air mix damper control link.
Engage the clamp and install the air mix damper control cable sub-assembly.
Engage the claw and install the cable ring to the defroster damper control link.
Engage the clamp and install the defroster damper control cable sub-assembly.
Engage the claw and install the cable ring to the air inlet damper control link.
Engage the clamp and install the air inlet damper control cable sub-assembly.
Engage the 4 claws and install the heater control and accessory assembly.
55902C
5.INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY
Engage the 5 clips and install the air conditioning panel sub-assembly.
55550
6.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55432B
7.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
55606
8.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY