Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
85720D
1.INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY
Apply MP grease to the sliding and rotating areas of the power window regulator motor assembly.
Using a T25 "TORX" socket wrench, install the power window regulator motor assembly with 3 screws.
69820
2.INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY
for TMMIN Made:
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR(for TMMIN Made)>REASSEMBLY
for TMT Made:
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR(for TMT Made)>REASSEMBLY