1.REMOVE FRONT WHEEL RH
53875A
2.REMOVE FRONT FENDER LINER RH (for TMMIN Made)
Use the same procedure as for the LH side.
Click hereDrivetrain>AXLE AND DIFFERENTIAL>FRONT AXLE HUB>REMOVAL
53875A
3.REMOVE FRONT FENDER LINER RH (for TMT Made)
Use the same procedure as for the LH side.
Click hereDrivetrain>AXLE AND DIFFERENTIAL>FRONT AXLE HUB>REMOVAL
4.DRAIN WASHER FLUID
Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.
Use a container to collect the washer fluid.
85310
5.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Disconnect the connector.
Remove the windshield washer motor and pump assembly.