85035
1.REMOVE WASHER NOZZLE SUB-ASSEMBLY
85035
2.ADJUST WASHER NOZZLE SUB-ASSEMBLY
for TMMIN Made:
Select a washer nozzle sub-assembly so that the contact area is within the standard. Replace the washer nozzle sub-assembly with the selected one.
| *a | Washer Fluid Spray Angle | *b | Part Number |
for TMT Made:
Select a washer nozzle sub-assembly so that the contact area is within the standard. Replace the washer nozzle sub-assembly with the selected one.
| *a | Washer Fluid Spray Angle | *b | Part Number |
85035
3.INSTALL WASHER NOZZLE SUB-ASSEMBLY