Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER(for TMT Made) › 2017.10–2018.01
RM30M0E _56 Audio / Visual / Telematics _017106 AUDIO / VIDEO _0335099 RADIO RECEIVER(for TMT Made) A

AUDIO / VIDEO  RADIO RECEIVER(for TMT Made)  REMOVAL  


PROCEDURE

Hide 55046A 1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

Hide 55045A 2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 3.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

a.
E381137

Remove the 8 screws.


b.
E381138

Disengage the 7 clips and 2 pins and pull the radio receiver assembly with bracket toward the rear of the vehicle.


c.

Disconnect the connectors and remove the radio receiver assembly with bracket.


Hide 86211 4.REMOVE NO. 1 RADIO BRACKET

a.
E362812

Remove the 3 screws and the No. 1 radio bracket.


Hide 86212 5.REMOVE NO. 2 RADIO BRACKET

a.
E362813

Remove the 3 screws and the No. 2 radio bracket.


Hide 55670 6.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
E362814

Disengage the 8 claws and remove the No. 3 instrument panel register assembly.