63310
1.REMOVE ROOF HEADLINING ASSEMBLY (for TMT Made)
63310
2.REMOVE ROOF HEADLINING ASSEMBLY (for TMMIN Made)
86309E
3.REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY (for Type A)
86300B
4.REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY (for Type A)
Disengage the 4 clamps.
Remove the antenna nut.
Disengage the 2 claws and remove the No. 1 amplifier antenna assembly.
86300B
5.REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY (for Type B)
Disconnect the connector.
Remove the bolt and holder.
Remove the No. 1 amplifier antenna assembly with antenna outer cover.
Disengage the 5 claws and 4 guides to remove the No. 1 amplifier antenna assembly.
When reusing the No. 1 amplifier antenna assembly:
Remove the seal.