86300B
1.INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY (for Type A)
Engage the 2 claws and temporarily install the No. 1 amplifier antenna assembly.
| *a | Cutout |
Place the antenna cord in the cutout of the antenna nut.
Install the No. 1 amplifier antenna assembly with the antenna nut.
Engage the 4 clamps.
86309E
2.INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY (for Type A)
86300B
3.INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY (for Type B)
When reusing the No. 1 amplifier antenna assembly:
Install a new seal.
Engage the 4 guides and 5 claws to install the No. 1 amplifier antenna assembly.
Install the No. 1 amplifier antenna assembly with antenna outer cover.
Install a new holder with the new bolt.
Connect the connector.
63310
4.INSTALL ROOF HEADLINING ASSEMBLY