Home › Engine / Hybrid System › 2NR-FE COOLING › COOLING FAN RESISTOR › 2017.10–2018.01
RM30M0E _51 Engine / Hybrid System _053565 2NR-FE COOLING _0259970 COOLING FAN RESISTOR A

2NR-FE COOLING  COOLING FAN RESISTOR  INSTALLATION  


PROCEDURE

Hide 85928B 1.INSTALL COOLING FAN RESISTOR

a.

Install the cooling fan resistor to the front side member reinforcement sub-assembly with the 2 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Connect the cooling fan resistor connector.