Home › Power Source / Network › POWER DISTRIBUTION › MAIN BODY ECU(for TMMIN Made) › 2017.10–2018.01
RM30M0E _57 Power Source / Network _017109 POWER DISTRIBUTION _0335243 MAIN BODY ECU(for TMMIN Made) A

POWER DISTRIBUTION  MAIN BODY ECU(for TMMIN Made)  REMOVAL  


PROCEDURE

Hide 55301 1.REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

Hide 82817H 2.REMOVE WIRING HARNESS PROTECTOR

B347428

a.

Disengage the 2 clamps to remove the wiring harness protector.


Hide 82730A 3.REMOVE DRIVER SIDE JUNCTION BLOCK ASSEMBLY

a.
B347399

Disconnect the 8 connectors on the front side.


b.

Remove the 2 bolts.


c.
B347400

Disconnect the 8 connectors on the back side to remove the driver side junction block assembly.


Hide 89221B 4.REMOVE BODY COMPUTER

a.
B348538C01
2.438,1.354 2.927,1.135 true 0.25,1.5 0.406,1.479 true 0.25,0.958 0.479,1.188 true 0.115,0.792 0.427,0.99 0.313,0.198 10 false *1 0.094,1.417 0.406,1.615 0.313,0.198 10 false *2 2.948,1.031 3.26,1.229 0.313,0.198 10 false *a
*1 Body Computer
*2 Driver Side Junction Block Assembly
*a Protective Tape


Press in and hold the 2 tabs on the driver side junction block assembly side to disengage the 2 claws.


b.

While pressing in the 2 tabs on the driver side junction block assembly side, insert a screwdriver with its tip wrapped in protective tape between the body computer and driver side junction block assembly.

NOTICE:

Use a blade screwdriver with a diameter of 5.0 to 6.3 mm (0.197 to 0.248 in.), and with a length of 90 mm (3.543 in.) or more.



c.
B346618C01
2.063,1.667 2.396,1.406 false 1.906,1.635 2.219,1.833 0.313,0.198 10 false *a
*a Protective Tape


Do not pry the inserted screwdriver. Lift up the body computer to the point where the lock releases.

NOTICE:
·

Do not twist the screwdriver to raise the body computer.


·

If any terminals of the connectors, locking parts or cases are deformed or damaged, replace the driver side junction block assembly or body computer.




d.
B341250

Disengage the 4 guides to remove the body computer by pulling it out from the driver side junction block assembly.