Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR › from 2017.10
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0116782 BACK DOOR A

DOOR / HATCH  BACK DOOR  DISASSEMBLY  


PROCEDURE

Hide 75129C 1.REMOVE REAR LICENSE PLATE CUSHION

a.
B470726

Remove the 2 rear license plate cushions.


Hide 75441E 2.REMOVE NO. 1 BACK DOOR NAME PLATE (w/ Brand Mark)

Hide 75442A 3.REMOVE NO. 2 BACK DOOR NAME PLATE

Hide 75443 4.REMOVE NO. 3 BACK DOOR NAME PLATE (w/ Engine Displacement Mark)

Hide 75444 5.REMOVE NO. 4 LUGGAGE COMPARTMENT DOOR PLATE (w/ Grade Mark)

Hide 76894D 6.REMOVE REAR SPOILER COVER LH (w/ Rear Spoiler)

Hide 76893A 7.REMOVE REAR SPOILER COVER RH (w/ Rear Spoiler)

HINT:

Use the same procedure as for the LH side.


Hide 76871 8.REMOVE REAR SPOILER (w/ Rear Spoiler)

Hide 76889D 9.REMOVE NO. 2 REAR SPOILER CLIP (w/ Rear Spoiler)

a.
B483938

Remove the No. 2 rear spoiler clip.


Hide 85345R 10.REMOVE REAR WASHER NOZZLE SUB-ASSEMBLY

Hide 85292A 11.REMOVE REAR WIPER ARM HEAD CAP

Hide 12.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

Hide 67005B 13.REMOVE BACK DOOR PANEL CUSHION

HINT:

Use the same procedure for both sides.


a.
B348199

Remove the back door panel cushion.


Hide 67751 14.REMOVE BACK DOOR TRIM BOARD

a.
B470727

Disengage the 11 clips to remove the back door trim board.


Hide 67848 15.REMOVE BACK DOOR SERVICE HOLE COVER LH

a.
B470728

Disengage the 2 claws and 2 guides to remove the back door service hole cover LH.


Hide 67847E 16.REMOVE BACK DOOR SERVICE HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 74811B 17.REMOVE DOOR PULL HANDLE

a.
B348200

Disengage the 4 claws to remove the door pull handle.


Hide 85110R 18.REMOVE REAR WIPER MOTOR ASSEMBLY

Hide 85143R 19.REMOVE REAR WIPER MOTOR GROMMET

Hide 69350 20.REMOVE BACK DOOR LOCK ASSEMBLY

Hide 81590A 21.REMOVE REAR LIGHT ASSEMBLY LH

Hide 81580D 22.REMOVE REAR LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 76801 23.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 84840G 24.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

Hide 81270 25.REMOVE LICENSE PLATE LIGHT ASSEMBLY

Hide 82185 28.REMOVE NO. 2 BACK DOOR WIRE

a.
B470729

Disconnect the 2 connectors.


b.

Using a clip remover, disengage the 7 clamps to remove the No. 2 back door wire.


Hide 64381A 29.REMOVE PACKAGE TRAY TRIM HANGER

HINT:

Use the same procedure for both sides.


a.
B470731

Remove the package tray trim hanger.


Hide 30.REMOVE CLIP

a.
B470732

Remove the clip.