Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
1.REMOVE REAR BUMPER ASSEMBLY
64711
2.REMOVE LUGGAGE COMPARTMENT FLOOR MAT
64770
3.REMOVE SPARE WHEEL COVER ASSEMBLY
64773D
4.REMOVE NO. 2 SPARE WHEEL COVER PAD
58387
5.REMOVE REAR FLOOR FINISH PLATE
64722B
6.REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER
81560
7.REMOVE REAR COMBINATION LIGHT ASSEMBLY
Disconnect the connector.
Remove the 3 nuts and rear combination light assembly.