Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55303B
1.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
87211C
2.REMOVE NO. 4 AIR DUCT
55306A
3.REMOVE NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
87103B
4.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Disconnect the connector.
Remove the 3 screws and blower motor with fan sub-assembly.
Do not apply excessive force to the instrument panel wire.