Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
87103B
1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Install the blower motor with fan sub-assembly with the 3 screws.
Do not apply excessive force to the instrument panel wire.
Connect the connector.
55306A
2.INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
87211C
3.INSTALL NO. 4 AIR DUCT
55303B
4.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY