Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › from 2018.01
RM30M0E _58 Vehicle Interior _017113 METER / GAUGE / DISPLAY _0089076 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (for Hatchback)

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 55661A 3.REMOVE INSTRUMENT PANEL REGISTER BEZEL

Hide 55411G 4.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for LHD)

Hide 55411G 5.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for RHD)

Hide 83100 6.REMOVE COMBINATION METER ASSEMBLY

a.
B487625C01
1.688,1.854 1.573,1.729 true 1.719,1.833 1.906,2.021 0.188,0.188 10 true *a
*a Protective Cover


Cover the upper steering column cover with the protective cover (a piece of cloth or nylon).


b.

Remove the 2 screws.


c.

Disengage the 2 clips and 2 guides to separate the combination meter assembly.


d.
B487626

Disconnect the 2 connectors to remove the combination meter assembly.