Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › from 2018.01
RM30M0E _58 Vehicle Interior _017113 METER / GAUGE / DISPLAY _0089076 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.

Engage the 2 guides and 2 clips to install the combination meter assembly.


c.

Install the 2 screws.


d.

Remove the protective cover (a piece of cloth or nylon).


Hide 55411G 2.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for LHD)

Hide 55411G 3.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for RHD)

Hide 55661A 4.INSTALL INSTRUMENT PANEL REGISTER BEZEL

Hide 5.CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (for Hatchback)

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION