Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY(for Sedan) › from 2018.01
RM30M0E _58 Vehicle Interior _017117 SEAT BELT _0092582 REAR SEAT OUTER BELT ASSEMBLY(for Sedan) A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for Sedan)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified.


PROCEDURE

Hide 2.REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 3.REMOVE REAR SEAT ASSEMBLY (for Separate Seat Type)

Hide 67918A 4.REMOVE REAR DOOR SCUFF PLATE LH

Hide 67917A 5.REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 62332A 6.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Disconnect the rear door opening trim weatherstrip LH to the extent that the rear seat side garnish LH and roof side inner garnish LH can be removed.


Hide 62331A 7.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 73370 8.DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

Hide 73360 9.DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62552F 10.REMOVE REAR SEAT SIDE GARNISH LH

Hide 62551F 11.REMOVE REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62472A 12.REMOVE ROOF SIDE INNER GARNISH LH

Hide 62471A 13.REMOVE ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 64330D 14.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 64274 15.REMOVE NO. 1 ROOM PARTITION TRIM PAD (for Separate Seat Type)

Hide 64272B 16.REMOVE ROOM PARTITION BOARD LH (for Separate Seat Type)

Hide 73360 17.REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

a.
B343508

Remove the bolt.


b.

Disengage the guide to remove the rear seat 3 point type outer belt assembly.


Hide 73143 18.REMOVE SEAT BELT HOLE SEAL

a.
B343509

Disengage the 2 claws to remove the seat belt hole seal.