Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
81560
1.INSTALL REAR COMBINATION LIGHT ASSEMBLY
Install the rear combination light assembly with the 3 nuts.
Connect the connector.
for LH Side:
Engage the clamp and connect the instrument panel wire.
64722B
2.INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER
58387
3.INSTALL REAR FLOOR FINISH PLATE
64773D
4.INSTALL NO. 2 SPARE WHEEL COVER PAD
Use the same procedure for the RH sides.
Click hereVehicle Exterior>DOOR / HATCH>FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD)>INSTALLATION
64770
5.INSTALL SPARE WHEEL COVER ASSEMBLY
64711
6.INSTALL LUGGAGE COMPARTMENT FLOOR MAT
7.INSTALL REAR BUMPER ASSEMBLY