Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD) › from 2018.01
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0087461 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD)  INSTALLATION  


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Install the fuel lid lock control cable sub-assembly to the 5 clamps as shown in the illustration.

B487263C01
2.74,4.719 2.833,4.917 false 2.667,5 2.875,5.094 true 4.5,5 4.354,4.74 true 4.083,4.698 4.26,4.615 true 5.542,4.635 5.677,4.552 true 5.688,4.656 5.688,4.802 false 6.031,3.302 5.927,3.365 false 6.177,3.563 6.073,3.688 true 6.292,2.271 6.063,2.24 true 6.271,2.313 6.208,2.458 true 2.531,4.906 2.844,5.104 0.313,0.198 10 false *1 2.573,4.625 2.885,4.823 0.313,0.198 10 false *a 5.406,4.542 5.719,4.74 0.313,0.198 10 false *1 5.635,4.802 5.948,5 0.313,0.198 10 false *a 4.552,4.896 4.865,5.094 0.313,0.198 10 false *1 5.938,3.625 6.25,3.823 0.313,0.198 10 false *1 3.927,4.594 4.24,4.792 0.313,0.198 10 false *a 5.781,3.313 6.094,3.51 0.313,0.198 10 false *a 5.896,2.156 6.208,2.354 0.313,0.198 10 false *1 6.094,2.438 6.406,2.635 0.313,0.198 10 false *a
*1 Fuel Lid Lock Control Cable Sub-assembly - -
*a Clamp - -



Hide 77377 2.INSTALL FUEL FILLER OPENING LID LOCK RETAINER

a.

Align the 2 guides with the 2 slits.


b.

Engage the 2 claws and install the fuel filler opening lid lock retainer.


c.

Engage the 2 claws and connect the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer.


Hide 58510D 3.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.

Engage the guide and return the front floor carpet assembly to the left side of the driver side rear floor.


b.

Engage the 2 guides to return the front floor carpet assembly to the driver side front floor.


Hide 77306 4.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.

Engage the 2 guides and connect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly.


b.
B346799

Engage the hook and install the fuel lid lock open lever sub-assembly in the direction indicated by the arrow as shown in the illustration.


c.

Install the screw.


Hide 64722B 5.INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER

a.

Install the No. 2 luggage compartment trim cover with the 3 clips.


Hide 58387 6.INSTALL REAR FLOOR FINISH PLATE

a.

Engage the 6 guides and the 4 claws, and install the rear floor finish plate.


b.

Install the 2 clips.


Hide 64772 7.INSTALL SPARE WHEEL COVER PAD

a.

Install the spare wheel cover pad.


Hide 64773B 8.INSTALL NO. 2 SPARE WHEEL COVER PAD

HINT:

Use the same procedure as for the spare wheel cover pad.


Hide 64770 9.INSTALL SPARE WHEEL COVER ASSEMBLY

a.

Install the spare wheel cover assembly.


Hide 64711 10.INSTALL LUGGAGE COMPARTMENT FLOOR MAT

a.

Install the luggage compartment floor mat.


Hide 62552F 11.INSTALL REAR SEAT SIDE GARNISH LH

Hide 62414A 12.INSTALL CENTER PILLAR LOWER GARNISH LH

Hide 73220 13.CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

Hide 62332A 14.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62312B 15.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 19.INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 20.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)