Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2018.01
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0090942 LIGHTING SYSTEM U

LIGHTING (EXT)  LIGHTING SYSTEM  TERMINALS OF ECU  


CHECK COMBINATION METER ASSEMBLY


E270874E04
5.365,0.229 5.896,0.552 0.531,0.323 1.875,0.219 2.406,0.542 0.531,0.323 5.51,0.313 5.969,0.51 0.458,0.198 10 false F39 2.031,0.302 2.49,0.5 0.458,0.198 10 false F38

a.

Disconnect the F38 and F39 combination meter assembly connectors.


b.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F38-1 (B) - Body ground B - Body ground Battery power supply Always 11 to 14 V

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Reconnect the F38 and F39 combination meter assembly connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F38-16 (PKBI) - Body ground L - Body ground Parking brake switch input Input parking brake switch on Below 1 V
Input parking brake switch off 11 to 14 V
F38-13 (DRLE) -Body ground*1 B - Body ground DRL relay drive output Ignition switch ON, daytime running light on Below 1 V
Ignition switch ON, daytime running light off 11 to 14 V
F39-11 (HAZ) - Body ground P - Body ground Hazard warning signal switch input Hazard warning signal switch off 11 to 14 V
Hazard warning signal switch on Below 1 V
F39-9 (ER) - Body ground L - Body ground Turn signal switch right signal input Ignition switch ON, turn signal switch in neutral position 11 to 14 V
Ignition switch ON, turn signal switch in right turn position Below 1 V
F39-10 (EL) - Body ground GR - Body ground Turn signal switch left signal input Ignition switch ON, turn signal switch in neutral position 11 to 14 V
Ignition switch ON, turn signal switch in left turn position Below 1 V

*1: w/ Daytime Running Light


If the result is not as specified, the combination meter assembly may be malfunctioning.



CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND BODY COMPUTER


E381144C17
3.344,3.75 3.844,4 0.5,0.25 6.333,4.75 6.667,5 0.333,0.25 5.396,4.844 5.729,5.094 0.333,0.25 4.333,4.771 4.667,5.021 0.333,0.25 3.406,4.823 3.74,5.073 0.333,0.25 2.531,4.854 2.865,5.104 0.333,0.25 1.531,4.823 1.865,5.073 0.333,0.25 1.5,6.146 1.833,6.396 0.333,0.25 0.531,4.896 0.865,5.146 0.333,0.25 2.615,6.177 2.948,6.427 0.333,0.25 3.99,6.083 4.323,6.333 0.333,0.25 5.188,6.26 5.521,6.51 0.333,0.25 5.031,7.458 5.365,7.708 0.333,0.25 4.052,7.458 4.385,7.708 0.333,0.25 2.781,7.438 3.115,7.688 0.333,0.25 1.635,7.469 1.969,7.719 0.333,0.25 2.969,0.813 3.417,0.177 3.417,0.177 3.583,0.177 true 6.167,0.948 6.521,0.552 6.521,0.552 6.688,0.552 true 6.104,1.229 6.542,0.875 6.542,0.875 6.708,0.875 true 6.167,1.615 6.583,1.302 6.583,1.302 6.75,1.302 true 6.073,1.896 6.5,1.698 6.5,1.698 6.667,1.698 true 6.104,2.167 6.531,1.969 6.531,1.969 6.698,1.969 true 6.125,2.406 6.5,2.635 6.5,2.635 6.667,2.635 true 6.125,3.021 6.5,3.25 6.5,3.25 6.667,3.25 true 5.677,3.135 6.042,3.74 6.042,3.74 6.208,3.74 true 1.125,3.24 0.75,3.667 0.75,3.667 0.583,3.667 true 1.74,3.229 2,3.667 2,3.667 2.167,3.667 true 1.104,1.188 0.667,0.75 0.667,0.75 0.5,0.75 true 1.167,1.531 0.729,1.094 0.729,1.094 0.563,1.094 true 1.135,1.854 0.698,1.417 0.698,1.417 0.531,1.417 true 1.167,2.177 0.729,1.74 0.729,1.74 0.563,1.74 true 1.167,2.458 0.792,2.167 0.792,2.167 0.625,2.167 true 0.167,0.104 0.479,0.302 0.313,0.198 10 false *1 3.479,3.792 3.792,3.99 0.313,0.198 10 false MB 5.479,4.896 5.792,5.094 0.313,0.198 10 false 6O 3.635,0.104 3.948,0.302 0.313,0.198 10 false MB 6.406,4.792 6.719,4.99 0.313,0.198 10 false 6M 0.333,1.344 0.646,1.542 0.313,0.198 10 false 6D 3.49,4.865 3.802,5.063 0.313,0.198 10 false 6E 1.615,4.865 1.927,5.063 0.313,0.198 10 false 6A 2.615,4.896 2.927,5.094 0.313,0.198 10 false 6C 0.615,4.938 0.927,5.135 0.313,0.198 10 false 6B 1.583,6.198 1.896,6.396 0.313,0.198 10 false 6N 2.698,6.219 3.01,6.417 0.313,0.198 10 false 6J 4.083,6.125 4.396,6.323 0.313,0.198 10 false 6L 5.271,6.302 5.583,6.5 0.313,0.198 10 false 6K 5.115,7.51 5.427,7.708 0.313,0.198 10 false 6G 4.135,7.5 4.448,7.698 0.313,0.198 10 false 6F 2.865,7.479 3.177,7.677 0.313,0.198 10 false 6I 1.719,7.51 2.031,7.708 0.313,0.198 10 false 6H 0.292,0.688 0.604,0.885 0.313,0.198 10 false 6N 0.344,1.031 0.656,1.229 0.313,0.198 10 false 6O 4.417,4.813 4.729,5.01 0.313,0.198 10 false 6D 0.333,1.667 0.646,1.865 0.313,0.198 10 false 6E 0.406,2.073 0.719,2.271 0.313,0.198 10 false 6C 0.385,3.594 0.698,3.792 0.313,0.198 10 false 6A 2.24,3.604 2.552,3.802 0.313,0.198 10 false 6B 6.74,0.479 7.052,0.677 0.313,0.198 10 false 6M 6.771,0.823 7.083,1.021 0.313,0.198 10 false 6J 6.802,1.229 7.115,1.427 0.313,0.198 10 false 6L 6.729,1.615 7.042,1.813 0.313,0.198 10 false 6K 6.76,1.917 7.073,2.115 0.313,0.198 10 false 6H 6.729,2.563 7.042,2.76 0.313,0.198 10 false 6I 6.74,3.177 7.052,3.375 0.313,0.198 10 false 6F 6.281,3.656 6.594,3.854 0.313,0.198 10 false 6G
*1 Driver Side Junction Block Assembly - -


B343148C37
5.5,2.74 6,3 0.5,0.26 4.281,2.729 4.781,2.99 0.5,0.26 3.896,2.021 4.031,2.021 4.031,2.021 4.646,1.458 true 1.667,2.24 1.792,2.24 1.792,2.24 2.24,2.677 false 5.833,1.958 5.667,1.958 5.667,1.958 5.25,1.458 true 0.104,0.083 0.417,0.281 0.313,0.198 10 false *1 5.573,2.792 6.031,2.99 0.458,0.198 10 false F125 3.615,1.927 4.073,2.125 0.458,0.198 10 false F52 1.427,2.156 1.74,2.354 0.313,0.198 10 false MB 4.385,2.781 4.844,2.979 0.458,0.198 10 false F52 5.938,1.885 6.396,2.083 0.458,0.198 10 false F125
*1 Body Computer - -


a.

Remove the body computer from the driver side junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Reconnect the driver side junction block assembly connectors


c.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-6 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-7 (IG) - Body ground - IG power supply Ignition switch ON 11 to 14 V
MB-1 (GND) - Body ground - Ground Always Below 1 Ω
MB-18 (DCTY) - Body ground*1 - Front door LH courtesy light switch input Front door LH open Below 1 V
Front door LH closed Pulse generation
MB-18 (DCTY) - Body ground*2 - Front door RH courtesy light switch input Front door RH open Below 1 V
Front door RH closed Pulse generation

*1: for LHD

*2: for RHD



d.

Reinstall the body computer to the driver side junction block assembly.


e.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F52-1 (TRLY) - Body ground B - Body ground TAIL relay drive output Taillights on Below 2 V
Taillights off 11 to 14 V
F52-6 (HAZ) - Body ground P - Body ground Hazard drive output Hazard warning signal switch off 11 to 14 V
Hazard warning signal switch on Below 1 V
F125-4 (CLTS) - Body ground*1 P - Body ground Automatic light control sensor signal input Ignition switch off Below 1 V
Ignition switch ON, automatic light control system operating Pulse generation
(See waveform 1)
F125-5 (CLTB) - F125-3 (CLTE)*1 W - V Automatic light control sensor power supply output Headlight dimmer switch (light control switch) in AUTO position 11 to 14 V
F125-6 (A) - Body ground*1 G - Body ground Headlight dimmer switch (light control switch) AUTO signal input Headlight dimmer switch (light control switch) not in AUTO position 11 to 14 V
Headlight dimmer switch (light control switch) in AUTO position Below 1 V
F125-7 (TAIL) - Body ground B - Body ground Headlight dimmer switch (light control switch) tail signal input Headlight dimmer switch (light control switch) in neither tail nor head position 11 to 14 V
Headlight dimmer switch (light control switch) in tail or head position Below 1 V
F125-8 (HEAD) - Body ground LG - Body ground Headlight dimmer switch (light control switch) head signal input Headlight dimmer switch (light control switch) not in head position 11 to 14 V
Headlight dimmer switch (light control switch) in head position Below 1 V
F125-9 (RFOG) - Body ground*2 B - Body ground Rear fog light switch input Headlight dimmer switch (light control switch) in tail or head position and front fog light switch off 11 to 14 V
Headlight dimmer switch (light control switch) in head or front fog light position and switch on Below 1 V
F125-10 (FFOG) - Body ground*3 R - Body ground Front fog light switch input Front fog light switch off 11 to 14 V
Front fog light switch on Below 1 V
F125-13 (HF) - Body ground R - Body ground Headlight dimmer switch high flash signal input Headlight dimmer switch not in high flash position 11 to 14 V
Headlight dimmer switch in high flash position Below 1 V
F125-14 (HU) - Body ground Y - Body ground Headlight dimmer switch high signal input Headlight dimmer switch in low position 11 to 14 V
Headlight dimmer switch in high position Below 1 V
6N-6 (RFGO) - Body ground*2 B - Body ground RR FOG relay drive output Headlight dimmer switch (light control switch) in head or front fog light position and rear fog light switch off 11 to 14 V
Headlight dimmer switch (light control switch) in head or front fog light position and switch on Below 1 V
6N-9 (FFGO) - Body ground*3 R - Body ground FR FOG relay drive output Headlight dimmer switch (light control switch) in tail or head position and front fog light switch off 11 to 14 V
Headlight dimmer switch (light control switch) in tail or head position and front fog light switch on Below 1 V
6D-2 (HRLY) - Body ground R - Body ground H-LP relay drive output Headlight dimmer switch (light control switch) in head position Below 1 V
Headlight dimmer switch (light control switch) not in head position 11 to 14 V
6D-4 (DIM) - Body ground BE - Body ground DIM relay drive output Headlight dimmer switch (dimmer switch) in high or high flash position Below 1 V
Headlight dimmer switch (dimmer switch) not in high or high flash position 11 to 14 V

*1: w/ Automatic Light Control

*2: w/ Rear Fog Light

*3: w/ Front Fog Light