Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) › from 2018.01
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0086573 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1443  Air Outlet Damper Control Servo Motor Circuit  


DESCRIPTION

The mode damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal, reverse) based on the signals to move the mode damper servo sub-assembly to any position, which controls the air outlet switching.

The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1443 Air Outlet Damper Control Servo Motor Circuit Air outlet damper position sensor value does not change even if air conditioning amplifier assembly operates mode damper servo sub-assembly
·

Mode damper servo sub-assembly

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly


Memorized
(30 seconds or more)*1

*1: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


WIRING DIAGRAM

E278112E02
0.479,4.24 1.75,4.604 1.271,0.365 10 false Mode Damper Servo Sub-assembly 2.948,4.313 4.49,4.698 1.542,0.385 10 false Air Conditioning Harness Assembly 5.365,4.448 6.917,4.833 1.552,0.385 10 false Air Conditioning Amplifier Assembly 5.365,4.25 5.583,4.448 0.219,0.198 10 false z2 5.563,1.313 5.781,1.51 0.219,0.198 10 false 4 5.563,2.188 5.781,2.385 0.219,0.198 10 false 3 5.552,3.219 5.771,3.417 0.219,0.198 10 false 2 5.792,1.438 6.333,1.635 0.542,0.198 10 false B BUS 5.792,2.375 6.333,2.573 0.542,0.198 10 false BUS 5.792,3.323 6.333,3.521 0.542,0.198 10 false BUS G 0.75,5.271 2.5,5.479 1.75,0.208 10 false : LIN Communication Line

CAUTION / NOTICE / HINT

HINT:

Confirm that no mechanical problem is present because this DTC can be output when either a damper link or damper is mechanically locked.


PROCEDURE

1.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Operate the MODE switch.


e.

Enter the following menus: Body Electrical / Air Conditioner / Data List.


f.

According to the display on the GTS, read the Data List.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Air Outlet Servo Pulse (D) Mode damper servo sub-assembly target pulse Min.: 128
Max.: 383
for LHD
·

FACE: 316 (pulse)

·

B/L: 301 (pulse)

·

FOOT: 278 (pulse)

·

FOOT/DEF: 267 (pulse)

·

DEF: 252 (pulse)


for RHD
·

FACE: 196 (pulse)

·

B/L: 211 (pulse)

·

FOOT: 234 (pulse)

·

FOOT/DEF: 245 (pulse)

·

DEF: 260 (pulse)


-
Air Outlet Servo Actu Pulse(D) Mode damper servo sub-assembly actual pulse Min.: 128
Max.: 383
for LHD
·

FACE: 316 (pulse)

·

B/L: 301 (pulse)

·

FOOT: 278 (pulse)

·

FOOT/DEF: 267 (pulse)

·

DEF: 252 (pulse)


for RHD
·

FACE: 196 (pulse)

·

B/L: 211 (pulse)

·

FOOT: 234 (pulse)

·

FOOT/DEF: 245 (pulse)

·

DEF: 260 (pulse)


-
Body Electrical > Air Conditioner > Data List
Tester Display
Air Outlet Servo Pulse (D)
50003 121 72
Body Electrical > Air Conditioner > Data List
Tester Display
Air Outlet Servo Actu Pulse(D)
50003 121 130
OK:

The display is as specified in the normal condition column.



Result:
Result Proceed to
OK (When troubleshooting according to Problem Symptoms Table) A
OK (When troubleshooting according to the DTC) B
NG C



A

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C

2.PERFORM ACTIVE TEST USING GTS
2.PERFORM ACTIVE TEST USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Active Test.


e.

According to the display on the GTS, perform the Active Test.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Air Outlet Servo Pulse (D) Mode damper servo sub-assembly pulse Min.: 128
Max.: 383
for LHD

Operates between 252 and 316 pulses


for RHD

Operates between 196 and 260 pulses


Body Electrical > Air Conditioner > Active Test
Tester Display
Air Outlet Servo Pulse (D)
50004 121 26

OK:

Mode damper servo sub-assembly operates normally.


Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

3.REPLACE MODE DAMPER SERVO SUB-ASSEMBLY
3.REPLACE MODE DAMPER SERVO SUB-ASSEMBLY
a.

Replace the mode damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the mode damper servo sub-assembly cannot be inspected while it is removed from the vehicle, replace the mode damper servo sub-assembly with a new or known good one and check that the condition returns to normal.



b.

Check for the DTC.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

NOTICE:

If the battery is disconnected, the past DTCs will be cleared.


Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1443 is output A
DTC B1443 is not output B




A

4.REPLACE AIR CONDITIONING HARNESS ASSEMBLY

B

END (MODE DAMPER SERVO SUB-ASSEMBLY WAS DEFECTIVE)

4.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
a.

Replace the air conditioning harness assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY

HINT:

Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or known good one and check that the condition returns to normal.



b.

Check for the DTC.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

NOTICE:

If the battery is disconnected, the past DTCs will be cleared.


Body Electrical > Air Conditioner > Trouble Codes
50001 121
Result:
Result Proceed to
DTC B1443 is output A
DTC B1443 is not output B




A

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

B

END (AIR CONDITIONING HARNESS ASSEMBLY WAS DEFECTIVE)