Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the LHD vehicles.
84052
1.INSTALL UNLOCK WARNING SWITCH ASSEMBLY
Engage the 2 claws and install the unlock warning switch assembly.
Connect the connector.
Remove the key from the ignition key cylinder.
45286B
2.INSTALL UPPER STEERING COLUMN COVER
45287
3.INSTALL LOWER STEERING COLUMN COVER
55411G
4.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>INSTALLATION
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>INSTALLATION
55661A
5.INSTALL INSTRUMENT PANEL REGISTER BEZEL