58910C
1.REMOVE REAR CONSOLE BOX ASSEMBLY
58816D
2.REMOVE NO. 1 FRONT CONSOLE BOX INSERT
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>REMOVAL
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>REMOVAL
58817A
3.REMOVE NO. 2 FRONT CONSOLE BOX INSERT
58911A
4.REMOVE NO. 1 BOX SIDE PANEL
58912C
5.REMOVE NO. 2 BOX SIDE PANEL
58916
6.REMOVE BOX BOTTOM MAT
58839A
7.REMOVE CONSOLE BOX HOLE COVER
58810J
8.REMOVE CONSOLE BOX ASSEMBLY
33820B
9.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
| *1 | Clip A |
| *2 | Clip B |
| *3 | Nut |
|
Rotate approximately 180° |
Remove the clip A to disconnect the select cable end of the transmission control cable assembly from the floor shift shift lever assembly.
Widen the clip B to disconnect the shift cable end of the transmission control cable assembly from the floor shift shift lever assembly.
Rotate the 2 nuts of the transmission control cable assembly approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the floor shift shift lever assembly.
Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.
33530F
10.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY
Disengage the 2 clamps to separate the wire harness from the floor shift shift lever assembly.
Remove the 4 bolts and floor shift shift lever assembly from the body.