55670
1.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
Engage the 8 claws and install the No. 3 instrument panel register assembly.
86211
2.INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 3 screws.
86212
3.INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 3 screws.
4.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
Connect the connectors.
Engage the 7 clips and 2 pins and temporarily install the radio receiver assembly with bracket.
Install the radio receiver assembly with bracket with the 8 screws.
55046A
5.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
55045A
6.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
Use the same procedure as for the LH side.