Home › Engine / Hybrid System › 1NR-FE STARTING › ENGINE SWITCH(for LHD) › from 2018.01
RM30M0E _51 Engine / Hybrid System _053949 1NR-FE STARTING _0335431 ENGINE SWITCH(for LHD) A

1NR-FE STARTING  ENGINE SWITCH(for LHD)  INSTALLATION  


PROCEDURE

Hide 89611 1.INSTALL ENGINE SWITCH

a.

Connect the engine switch connector.


b.

Engage the 2 claws to install the engine switch to the No. 2 lower center instrument panel finish panel.


Hide 45287 2.INSTALL LOWER STEERING COLUMN COVER

Hide 55432B 3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)

Hide 73900 4.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

Hide 55480D 5.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55606 6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY