48811
1.INSTALL FRONT STABILIZER BAR
Set the front stabilizer bar to the front suspension crossmember sub-assembly.
Make sure that the identification mark is positioned on the right side of the vehicle.
| *a | Identification Mark | - | - |
|
Front of the Vehicle | - | - |
|
Front of the Vehicle |
Install the front stabilizer bar to the front suspension crossmember sub-assembly with the 4 bolts.
Temporarily tighten the bolt (B) and then fully tighten the 2 bolts in the order of (A) and (B).
48810
2.INSTALL FRONT STABILIZER LINK ASSEMBLY LH
Install the front stabilizer link assembly LH to the front shock absorber assembly LH with the nut.
If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
48820B
3.INSTALL FRONT STABILIZER LINK ASSEMBLY RH
Perform the same procedure as for the LH side.
4.INSTALL STEERING LINK ASSEMBLY