Home › Power Source / Network › M15A-FXE (BATTERY / CHARGING) › CHARGING SYSTEM
RM36W0E _57 Power Source / Network _087764 M15A-FXE BATTERY / CHARGING _0419405 CHARGING SYSTEM D

M15A-FXE BATTERY / CHARGING  CHARGING SYSTEM  DTC CHECK / CLEAR  


CHECK FOR DTCS


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Powertrain > Hybrid Control > Trouble Codes
50001 397

e.

Check the DTCs and freeze frame data, and then write them down.


f.

Check the details of the DTCs.

HINT:
GTS Display Description
Test Failed Shows the malfunction judgment results during the current trip.
Pending Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
Confirmed Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)




CHECK FREEZE FRAME DATA


a.

If a DTC is stored, select it in order to display its freeze frame data.


b.

Read the freeze frame data recorded when the DTC was stored.



CLEAR DTCS


NOTICE:

Clearing the DTCs will also clear the freeze frame data.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


e.

Clear the DTCs and freeze frame data.

Powertrain > Hybrid Control > Clear DTCs
50002 397