Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) › 2020.03–2020.07
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0420272 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model) D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model)  VEHICLE CONTROL HISTORY  


DESCRIPTION


·

Vehicle Control History is a function that captures and stores ECU data when triggered by specific vehicle behavior.

·

It may be possible to determine the cause of the malfunction by checking the vehicle history information and freeze frame data.

·

The number of possible stored Freeze Frame Data sets, whether multi Freeze Frame Data is available, the number of freeze frame points, Freeze Frame Data items, the ECU internal range, etc., is different depending on the stored group.

·

The stored data items for Vehicle Control History Freeze Frame Data are different depending on the stored group. When the value of a data item does not change across all points, only the value of the detection point will be displayed. The contents of the Freeze Frame Data is almost the same as that of the Data List.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>DATA LIST / ACTIVE TEST



PRECAUTIONS


·

As Vehicle Control History may be overwritten whenever the trigger conditions are met, make sure to save Vehicle Control History before performing any inspections.

·

As Vehicle Control History may be stored when performing an Active Test, learning, etc., make sure to clear the Vehicle Control History before returning the vehicle to the customer.



CHECK VEHICLE CONTROL HISTORY (ELECTRONICALLY CONTROLLED BRAKE SYSTEM) (BRAKE)


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Operate the GTS to enter the Vehicle Control History (RoB).

Chassis > Brake > Utility
Tester Display
Vehicle Control History (RoB)
50005 435 55
Code Tester Display Measurement Item Brake System Warning Light ABS Warning Light Slip Indicator Light Diagnostic Note
X2096 Pre-Collision Brake History of pre-collision brake operation - - - Warnings according to the PCS
X2098 Pre-Collision Brake Assist History of pre-collision brake assist operation - - - Warnings according to the PCS
X20A0 ABS History of ABS operation - - - -
X20A1 VSC History of VSC operation - - Blinks -
X20A2 TRC(TRAC) History of TRC operation - - Blinks -
X20A5 Hill Start Assist History of hill start assist operation - - - -
X20A7 Brake Assist History of brake assist operation - - - -
X20A8 Secondary Collision Brake History of secondary collision brake operation - - - -



CLEAR VEHICLE CONTROL HISTORY (ELECTRONICALLY CONTROLLED BRAKE SYSTEM) (BRAKE)


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Operate the GTS to enter the Vehicle Control History (RoB).

Chassis > Brake > Utility
Tester Display
Vehicle Control History (RoB)
50005 435 55

f.

Press the DTC clear button.

NOTICE:

By performing this procedure, all stored Vehicle Control History items will be cleared.




CHECK VEHICLE CONTROL HISTORY (ELECTRONICALLY CONTROLLED BRAKE SYSTEM) (STEERING ANGLE SENSOR)


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Operate the GTS to enter the Vehicle Control History (RoB).

Chassis > Steering Angle Sensor > Utility
Tester Display
Vehicle Control History (RoB)
50005 445 55
Code Tester Display Measurement Item Slip Indicator Light Diagnostic Note
XF01B ECU Security Key Not Registered ECU security key has not been registered * (Click here)

*: Receive side ECU detects communication malfunction and may operate warning in multi-information display or indicator light.




CLEAR VEHICLE CONTROL HISTORY (ELECTRONICALLY CONTROLLED BRAKE SYSTEM) (STEERING ANGLE SENSOR)


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Operate the GTS to enter the Vehicle Control History (RoB).

Chassis > Steering Angle Sensor > Utility
Tester Display
Vehicle Control History (RoB)
50005 445 55

f.

Press the DTC clear button.

NOTICE:

By performing this procedure, all stored Vehicle Control History items will be cleared.




CHECK VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)


HINT:

A part of the control history can be confirmed using the vehicle control history.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>VEHICLE CONTROL HISTORY