Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2020.03–2021.04
RM36W0E _58 Vehicle Interior _087985 METER / GAUGE / DISPLAY _0420292 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  B132187  Lost Communication with EMV Missing Message  


DESCRIPTION

The combination meter assembly and radio and display receiver assembly communicate via local bus communication. This allows audio and visual system information to be displayed on the multi-information display.

This DTC is stored when a communication error occurs between the radio and display receiver assembly and combination meter assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area
B132187 Lost Communication with EMV Missing Message Diagnosis Condition:
·

The ignition switch is ON

·

IG power source voltage is 9.5 V or more


Malfunction Status:

No communication with radio and display receiver assembly


Malfunction Time:

30 seconds or more


·

Harness or connector

·

Radio and display receiver assembly

·

Combination meter assembly



WIRING DIAGRAM

E369856E45
5.042,1.458 6.906,1.698 1.865,0.24 10 false Combination Meter Assembly 0.74,1.448 3.115,1.688 2.375,0.24 10 false Radio and Display Receiver Assembly 0.99,3.021 3.104,3.302 2.115,0.281 10 false Meter Mirror Sub-assembly*1 0.927,3.365 3.073,3.573 2.146,0.208 10 false : Local Bus Communication Line 5.052,1.292 5.354,1.5 0.302,0.208 10 false H6 5.271,0.344 5.99,0.635 0.719,0.292 10 false MSCH 2.115,0.479 2.521,0.688 0.406,0.208 10 false CNH1 2.135,0.896 2.542,1.104 0.406,0.208 10 false CNL1 2.271,2.406 2.677,2.615 0.406,0.208 10 false TX- 2.24,1.958 2.583,2.156 0.344,0.198 10 false TX+ 4.979,0.344 5.229,0.604 0.25,0.26 10 false 27 4.979,0.75 5.281,0.958 0.302,0.208 10 false 10 3.635,3.365 5.802,3.708 2.167,0.344 10 false *1: w/ Headup Display System 2.625,0.344 2.823,0.583 0.198,0.24 10 false 5 2.625,0.75 2.823,0.99 0.198,0.24 10 false 6 2.604,1.865 3.01,2.073 0.406,0.208 10 false 14 2.604,2.281 3.01,2.49 0.406,0.208 10 false 15 5.948,0.646 6.448,0.875 0.5,0.229 10 false CAN I/F 0.74,1.281 1.125,1.531 0.385,0.25 10 false H80 0.99,2.854 1.292,3.063 0.302,0.208 10 false H61 5.271,0.76 5.979,1.01 0.708,0.25 10 false MSCL 4.167,1.5 4.406,1.729 0.24,0.229 10 false *1 3.635,1.5 3.875,1.729 0.24,0.229 10 false *1

CAUTION / NOTICE / HINT

NOTICE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.


PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check vehicle condition.


Result:
Result Proceed to
w/ Navigation System A
w/o Navigation System B



A

2.CHECK FOR DTC (NAVIGATION SYSTEM)

B

4.CHECK FOR DTC (AUDIO AND VISUAL SYSTEM)
2.CHECK FOR DTC (NAVIGATION SYSTEM)
a.

Check if navigation system DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

3.CHECK FOR DTC (HEADUP DISPLAY SYSTEM)

B

3.CHECK FOR DTC (HEADUP DISPLAY SYSTEM)
a.

Check if headup display system DTCs are output.

Body Electrical > Head Up Display > Trouble Codes
50001 408
HINT:
·

If DTC B132187 is output from the meter / gauge system and is not output from the headup display system, it can be suspected that the combination meter assembly has an internal malfunction.

·

If DTC B132187 is output from the headup display system and is not output from the navigation system, it can be suspected that the radio and display receiver assembly has an internal malfunction.




Result:
Result Proceed to
B132187 is not output A
B132187 is output B



A

REPLACE COMBINATION METER ASSEMBLY

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

4.CHECK FOR DTC (AUDIO AND VISUAL SYSTEM)
a.

Check if audio and visual system DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

5.REPLACE COMBINATION METER ASSEMBLY

B

5.REPLACE COMBINATION METER ASSEMBLY
a.

Replace the combination meter assembly with a new one.

HINT:

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL



Result:
Proceed to
NEXT



NEXT

6.CHECK FOR DTC (METER / GAUGE SYSTEM)
6.CHECK FOR DTC (METER / GAUGE SYSTEM)

Pre-procedure1

a.

Turn the ignition switch to ON.


b.

Wait 30 seconds or more.


Procedure1

c.

Check if meter / gauge system DTCs are output.

Body Electrical > Combination Meter > Trouble Codes
50001 409

Post-procedure1

d.

None


Result:
Result Proceed to
B132187 is not output A
B132187 is output B



A

END (COMBINATION METER ASSEMBLY WAS DEFECTIVE)

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY