Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM36W0E _58 Vehicle Interior _087985 METER / GAUGE / DISPLAY _0420292 METER / GAUGE SYSTEM J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  Hybrid System Indicator Malfunction  


DESCRIPTION

A hybrid system indicator has been included on this vehicle. In this circuit, the combination meter assembly receives the hybrid system indicator signal from the hybrid vehicle control ECU via CAN communication. The combination meter assembly controls the operation of the hybrid system indicator according to the hybrid system indicator signal received from the hybrid vehicle control ECU via CAN communication.

WIRING DIAGRAM

E370855E25
0.677,2.271 3.042,2.521 2.365,0.25 10 false : CAN Communication Line 0.958,1.583 2.802,2.042 1.844,0.458 10 false Hybrid Vehicle Control ECU 4.677,1.563 6.656,1.969 1.979,0.406 10 false Combination Meter Assembly

CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Before replacing the hybrid vehicle control ECU, refer to Registration.



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

2.CHECK FOR DTC (HYBRID CONTROL SYSTEM)

B

2.CHECK FOR DTC (HYBRID CONTROL SYSTEM)
a.

Check if hybrid control system DTCs are output.

Powertrain > Hybrid Control > Trouble Codes
50001 397

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

3.CHECK VEHICLE TYPE

B

3.CHECK VEHICLE TYPE
a.

Check vehicle condition.

Result:
Result Proceed to
for Analog Meter A
for Digital Meter B




A

4.PERFORM ACTIVE TEST USING GTS

B

5.READ VALUE USING GTS
4.PERFORM ACTIVE TEST USING GTS
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
HV/EV System Indicator (MIN) Hybrid system indicator value
(Charge area)
ON See [Display 1]
HV/EV System Indicator (-50%) Hybrid system indicator value
(Charge area)
ON See [Display 1]
HV/EV System Indicator (0%) Hybrid system indicator value
(Charge area)
ON See [Display 1]
HV/EV System Indicator (100%) Hybrid system indicator value
(Eco area)
ON See [Display 1]
HV/EV System Indicator (200%) Hybrid system indicator value
(Power area)
ON See [Display 1]
HV/EV System Indicator (300%) Hybrid system indicator value
(Power area)
ON See [Display 1]
HV/EV System Indicator (400%) Hybrid system indicator value
(Power area)
ON See [Display 1]
HV/EV System Indicator (MAX) Hybrid system indicator value
(Power area)
ON See [Display 1]
[Display 1]: HV/EV System Indicator
E436795C01
0.385,2.979 0.698,3.177 0.313,0.198 10 false 1 0.25,2.656 0.563,2.854 0.313,0.198 10 false 2 0.146,2.146 0.458,2.344 0.313,0.198 10 false 3 1.354,0.49 1.667,0.688 0.313,0.198 10 false 4 1.865,0.417 2.177,0.615 0.313,0.198 10 false 5 2.427,0.5 2.74,0.698 0.313,0.198 10 false 6 2.896,0.75 3.208,0.948 0.313,0.198 10 false 7 3.24,1.156 3.427,1.375 0.188,0.219 10 false 8 0.115,0.104 0.427,0.302 0.313,0.198 10 false *a
*a Hybrid System Indicator


HINT:

Refer to the following table for the specified hybrid system indicator position for each selected value:

Tester Display Hybrid System Indicator Indication
HV/EV System Indicator
(MIN)
Approximately 1 is indicated
HV/EV System Indicator
(-50%)
Approximately 2 is indicated
HV/EV System Indicator
(0%)
Approximately 3 is indicated
HV/EV System Indicator
(100%)
Approximately 4 is indicated
HV/EV System Indicator
(200%)
Approximately 5 is indicated
HV/EV System Indicator
(300%)
Approximately 6 is indicated
HV/EV System Indicator
(400%)
Approximately 7 is indicated
HV/EV System Indicator
(MAX)
Approximately 8 is indicated



Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (MIN)
50004 409 256
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (-50%)
50004 409 257
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (0%)
50004 409 258
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (100%)
50004 409 259
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (200%)
50004 409 260
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (300%)
50004 409 261
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (400%)
50004 409 262
Body Electrical > Combination Meter > Active Test
Tester Display
HV System Indicator (MAX)
50004 409 263
OK:

Hybrid system indicator indication is normal.



Result:
Proceed to
OK
NG



OK

NG

REPLACE COMBINATION METER ASSEMBLY

5.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
HV/EV System Indicator Hybrid system indicator value Min.: -101%, Max.: 511% or Unset Current hybrid system indicator value "Unset" is displayed when the vehicle is stopped and the ignition switch is on (READY).
Body Electrical > Combination Meter > Data List
Tester Display
HV/EV System Indicator
50003 409 66
OK:

Hybrid system indicator value displayed on the GTS is almost the same as the hybrid system indicator indication.



Result:
Proceed to
OK
NG



OK

NG

REPLACE COMBINATION METER ASSEMBLY