Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2020.03–2020.07
RM36W0E _58 Vehicle Interior _087985 METER / GAUGE / DISPLAY _0420292 METER / GAUGE SYSTEM J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  Tachometer Malfunction  


DESCRIPTION

In this circuit, the combination meter assembly receives engine speed signals from the ECM via CAN communication. The combination meter assembly displays the engine speed calculated based on the data received from the ECM.

WIRING DIAGRAM

E370855E20
0.677,2.271 3.042,2.521 2.365,0.25 10 false : CAN Communication Line 1.656,1.563 3.208,2.115 1.552,0.552 10 false ECM 4.677,1.563 6.656,1.969 1.979,0.406 10 false Combination Meter Assembly

CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Before replacing the ECM, refer to Service Bulletin.



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

2.CHECK FOR DTC (SFI SYSTEM)

B

2.CHECK FOR DTC (SFI SYSTEM)
a.

Check if SFI system DTCs are output.

Powertrain > Engine > Trouble Codes
50001 372

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

3.CHECK VEHICLE TYPE

B

3.CHECK VEHICLE TYPE
a.

Check vehicle condition.

Result:
Result Proceed to
for Analog Meter A
for Digital Meter B




A

4.PERFORM ACTIVE TEST USING GTS

B

5.READ VALUE USING GTS
4.PERFORM ACTIVE TEST USING GTS
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
TachoMeter Operation (0rpm) Tachometer
(0 rpm)
ON -
TachoMeter Operation (1000rpm) Tachometer
(1000 rpm)
ON -
TachoMeter Operation (2000rpm) Tachometer
(2000 rpm)
ON -
TachoMeter Operation (3000rpm) Tachometer
(3000 rpm)
ON -
TachoMeter Operation (4000rpm) Tachometer
(4000 rpm)
ON -
TachoMeter Operation (5000rpm) Tachometer
(5000 rpm)
ON -
TachoMeter Operation (6000rpm) Tachometer
(6000 rpm)
ON -
TachoMeter Operation (7000rpm) Tachometer
(7000 rpm)
ON -
TachoMeter Operation (8000rpm) Tachometer
(8000 rpm)
ON -
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (0rpm)
50004 409 210
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (1000rpm)
50004 409 211
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (2000rpm)
50004 409 212
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (3000rpm)
50004 409 213
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (4000rpm)
50004 409 214
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (5000rpm)
50004 409 215
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (6000rpm)
50004 409 216
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (7000rpm)
50004 409 217
Body Electrical > Combination Meter > Active Test
Tester Display
TachoMeter Operation (8000rpm)
50004 409 218
OK:

Tachometer indication is normal.



Result:
Proceed to
OK
NG



OK

NG

REPLACE COMBINATION METER ASSEMBLY

5.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS

Body Electrical > Combination Meter > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Engine RPM Engine speed Min.: 0 rpm, Max.: 12701 rpm or Unset Almost the same as actual tachometer -
Body Electrical > Combination Meter > Data List
Tester Display
Engine RPM
50003 409 24
OK:

Engine speed displayed on the GTS is almost the same as the tachometer indication.



Result:
Proceed to
OK
NG



OK

NG

REPLACE COMBINATION METER ASSEMBLY