Home › Vehicle Exterior › MIRROR (EXT) › POWER MIRROR CONTROL SYSTEM › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _088061 MIRROR (EXT) _0420503 POWER MIRROR CONTROL SYSTEM U

MIRROR (EXT)  POWER MIRROR CONTROL SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY


E434511C02
3.375,4.844 3.813,5.094 0.438,0.25 3.625,0.24 4.063,0.49 0.438,0.25 0.969,3.24 1.406,3.49 0.438,0.25 3.365,3.24 3.802,3.49 0.438,0.25 5.719,3.24 6.156,3.49 0.438,0.25 1.958,1.323 2.396,1.573 0.438,0.25 1.896,0.729 2.26,0.479 false 1.271,0.51 1.635,0.26 false 3.76,0.302 4.073,0.5 0.313,0.198 10 false MB 3.51,4.896 3.823,5.094 0.313,0.198 10 false MB 1.125,3.292 1.438,3.49 0.313,0.198 10 false H5 1.688,0.167 2,0.365 0.313,0.198 10 false *1 2.313,0.396 2.625,0.594 0.313,0.198 10 false *2 3.51,3.281 3.823,3.479 0.313,0.198 10 false 4C 5.875,3.292 6.188,3.49 0.313,0.198 10 false 4B 5.896,1.125 6.208,1.323 0.313,0.198 10 false 4C 5.896,1.688 6.208,1.885 0.313,0.198 10 false 4B 2.104,1.375 2.417,1.573 0.313,0.198 10 false H5
*1 Power Distribution Box Assembly *2 Main Body ECU (Multiplex Network Body ECU)


a.

Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Reconnect the power distribution box assembly connectors.


c.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
MB-26 (BECU) - Body ground Auxiliary battery power supply Ignition switch off 11 to 14 V
MB-27 (IGR) - Body ground Ignition power supply (IG signal) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
MB-13 (GND1) - Body ground Body Ground Always Below 1 Ω


d.

Install the main body ECU (multiplex network body ECU) to power distribution box assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


e.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
H5-26 (AMR) - Body ground Power retract mirror motor drive voltage (Input) Auto retractable outer mirror switch on outer mirror switch assembly auto retracted position. Below 1 V
Auto retractable outer mirror switch on outer mirror switch assembly return position. 11 to 14 V
H5-27 (RET) - Body ground Power retract mirror motor drive voltage (Input) Auto retractable outer mirror switch on outer mirror switch assembly retracted position. Below 1 V
Auto retractable outer mirror switch on outer mirror switch assembly driving position. 11 to 14 V
4B-2 - Body ground*1 Mirror heater drive voltage (Output) Ignition switch ON, rear defogger switch off. Below 1 V
Ignition switch ON, rear defogger switch on. 11 to 14 V
4C-10 - Body ground Power retract mirror motor drive voltage (Output) Outer rear view mirror assembly moves to the retracted position. Below 1 V
Outer rear view mirror assembly not move. 11 to 14 V
4C-21 - Body ground Power retract mirror motor drive voltage (Output) Outer rear view mirror assembly moves to the return position. Below 1 V
Outer rear view mirror assembly not move. 11 to 14 V
4C-24 - Body ground*2 Rear defogger switch signal (Input) Ignition switch ON, rear defogger switch off. Below 1 V
Ignition switch ON, rear defogger switch on. 11 to 14 V

*1: w/ Mirror Heater

*2: for Manual Air Conditioning System




CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (for Automatic Air Conditioning System with Mirror Heater)


Click hereVehicle Exterior>WINDOW / GLASS>WINDOW DEFOGGER SYSTEM>TERMINALS OF ECU


AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System with Mirror Heater)


Click hereVehicle Exterior>WINDOW / GLASS>WINDOW DEFOGGER SYSTEM>TERMINALS OF ECU