Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _087824 LIGHTING (EXT) _0421027 STOP LIGHT SWITCH A

LIGHTING (EXT)  STOP LIGHT SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 84345 1.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

a.
E441622

Engage the claw to install a new stop light switch mounting adjuster.


Hide 84340 2.INSTALL STOP LIGHT SWITCH ASSEMBLY

a.
E167768C16
1.385,1.292 1.729,1.76 true 1.771,1.74 2.021,1.979 0.25,0.24 10 false *1
*1 Stop light switch mounting adjuster


Insert the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

NOTICE:

Do not depress the brake pedal.



b.
E167769C03
1.521,1.99 1.698,2.177 0.177,0.188 10 true *a
*a Protrusion Amount Measurement Area


Turn the stop light switch assembly clockwise by approximately one fourth of a rotation.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


c.

Check the protrusion amount of the shaft.

Standard:

0.5 to 2.6 mm (0.0197 to 0.1024 in.)



d.

Connect the connector.


Hide 55606 3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY