52156A
1.INSTALL REAR BUMPER SIDE SUPPORT LH
Install the rear bumper side support LH with screw.
w/ Blind Spot Monitor System:
Engage the wire harness clamps.
52155A
2.INSTALL REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
3.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
for Halogen Headlight:
Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for Halogen Headlight)>INSTALLATION
for LED Headlight:
Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY (for LED Headlight)>INSTALLATION
4.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52576
5.INSTALL REAR BUMPER SIDE RETAINER LH
Engage the guide and claws to install the rear bumper side retainer LH.
Engage the clips as shown in the illustration.
w/ Blind Spot Monitor System:
Engage the wire harness clamp.
52575
6.INSTALL REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52453
7.INSTALL REAR BUMPER CENTER GUARD
Engage the claws to install the rear bumper center guard.
Install the 2 clips.
81920
8.INSTALL REFLEX REFLECTOR ASSEMBLY LH
Engage the guide and claw to install the reflex reflector assembly LH.
Install the screw.
81910
9.INSTALL REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
82182
10.INSTALL NO. 2 LUGGAGE ROOM WIRE
w/ Parking Support Brake System:
Engage the clamps to install the No. 2 luggage room wire.
w/o Parking Support Brake System:
Engage the clamps to install the No. 2 luggage room wire.
11.INSTALL BACK-UP LIGHT ASSEMBLY
89348R
12.INSTALL REAR CORNER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)
89348S
13.INSTALL REAR CENTER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)
89342
14.INSTALL REAR CORNER ULTRASONIC SENSOR (w/ Parking Support Brake System)
89342A
15.INSTALL REAR CENTER ULTRASONIC SENSOR (w/ Parking Support Brake System)