Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _088480 DOOR / HATCH _0421660 FUEL LID LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY (for Driver Side)

Hide 64740C 2.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.

Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>REMOVAL


Hide 62413A 3.REMOVE CENTER PILLAR LOWER GARNISH RH

Hide 77306 4.REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.
B576078C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the screw.


b.

Disengage the guide to separate the fuel lid lock open lever sub-assembly as shown in the illustration.


c.
B576079

Disengage the guide to remove the fuel lid lock open lever sub-assembly from the fuel lid lock control cable assembly.


Hide 77377 5.REMOVE FUEL FILLER OPENING LID LOCK RETAINER

a.
B576080C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Remove the fuel filler opening lid lock retainaer as shown in the illustration.


Hide 77035 6.REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.
B576081

Disengage the claws to separate the fuel lid lock control cable sub-assembly.


b.

Disengage the clamps to remove the fuel lid lock control cable sub-assembly.

B565076