Home › Engine / Hybrid System › M15A-FXE (COOLING) › WATER PUMP
RM36W0E _51 Engine / Hybrid System _088542 M15A-FXE COOLING _0421976 WATER PUMP A

M15A-FXE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16032 1.INSTALL ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING)

a.

Install a new gasket to the engine water pump assembly (water inlet housing).

HINT:

Be sure to clean the contact surfaces.



b.

Install the engine water pump assembly (water inlet housing) to the cylinder block sub-assembly with the 4 bolts.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


Hide 16031 2.INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY