Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for Gasoline Model) › 2020.03–2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0422044 BRAKE PEDAL(for Gasoline Model) N

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for Gasoline Model)  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT AND ADJUST BRAKE PEDAL HEIGHT

a.

Remove front door scuff plate RH.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


b.

Remove cowl side trim board RH.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


c.

Turn back tibia pad.


d.

Check the brake pedal height.

HINT:

Inspect and adjust the brake pedal height with the tibia pad folded back.


i.

Measure the shortest distance between the brake pedal pad surface and floor panel as shown in the illustration.

C429810C01
2.802,1.906 2.594,1.656 true 6.24,0.896 5.958,1.042 true 2.792,1.938 2.979,2.115 0.188,0.177 10 true *1 0.896,1.438 1.167,1.604 0.271,0.167 10 true *a 5.958,1.802 6.271,1.958 0.313,0.156 10 false *a 6.302,0.823 6.49,1 0.188,0.177 10 true *1
*1 Brake Pedal Pad - -
*a Brake Pedal Height - -
V100155

Measuring Plane of Floor Panel - -


Brake Pedal Height from Floor Panel:

157.8 to 173.8 mm (6.21 to 6.84 in.)


If the pedal height is not as specified, adjust the brake pedal height according to the procedure below.



e.

Adjust the brake pedal height.

i.
C429827C01
1.313,4.063 1.875,3.917 true 2.313,1.344 2.646,1.344 false 1.594,2.104 1.594,1.771 false 2.698,1.292 3.01,1.448 0.313,0.156 10 false *1 1.51,2.135 1.823,2.292 0.313,0.156 10 false *2 2.292,3.552 2.604,3.708 0.313,0.156 10 false *a 1.125,4.01 1.438,4.167 0.313,0.156 10 false *3
*1 Stop Light Switch Assembly
*2 Clevis Lock Nut
*3 Floor Panel
*a Brake Pedal Height


Remove the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>REMOVAL


ii.

Loosen the clevis lock nut.


iii.

Adjust the brake pedal height by turning the push rod.

Brake Pedal Height from Floor Panel:

157.8 to 173.8 mm (6.21 to 6.84 in.)



iv.

Tighten the clevis lock nut.

Torque:
26 N*m (265 kgf*cm, 19 ft.*lbf)


v.

Install the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION



f.

Install the tibia pad to its original position.


g.

h.

Install front door scuff plate RH.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 2.INSPECT BRAKE PEDAL FREE PLAY

a.

Stop the engine and firmly depress the brake pedal several times until no vacuum is left in the brake booster assembly.


b.
C132708C04
2.177,1.542 2.781,1.885 0.604,0.344 10 *a
*a Brake Pedal Free Play


Depress the brake pedal until a slight resistance is felt. Measure the brake pedal free play as shown in the illustration.

Brake Pedal Free Play:

1.0 to 6.0 mm (0.0394 to 0.236 in.)


If the pedal free play is not as specified, check the stop light switch clearance.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION

If the pedal free play is as specified, proceed to the Inspect Brake Pedal Reserve Distance procedure.


Hide 3.INSPECT BRAKE PEDAL RESERVE DISTANCE

a.

Remove front door scuff plate RH.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


b.

Remove cowl side trim board RH.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


c.

Turn back tibia pad.


d.

With the engine running, depress the brake pedal and measure the brake pedal reserve distance as shown in the illustration.

C429812C01
2.896,1.813 2.875,1.521 true 5.708,1.104 6,0.771 false 2.813,1.844 3.01,2 0.198,0.156 10 true *1 6.042,0.677 6.26,0.875 0.219,0.198 10 true *1 6.042,1.729 6.26,1.927 0.219,0.198 10 true *a 1.375,1.271 1.573,1.448 0.198,0.177 10 true *a
*1 Brake Pedal Pad - -
*a Brake Pedal Reserve Distance - -
V100155

Measuring Plane of Floor Panel - -


Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf):

83 mm (3.27 in.) or more


If the distance is not as specified, troubleshoot the brake system.

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE SYSTEM (for Gasoline Model)>PROBLEM SYMPTOMS TABLE


e.

Install the tibia pad to its original position.


f.

g.

Install front door scuff plate RH.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION