Home › Drivetrain › K320 (MULTIDRIVE / CVT) › OIL COOLER
RM36W0E _52 Drivetrain _087836 K320 MULTIDRIVE / CVT _0422060 OIL COOLER A

K320 MULTIDRIVE / CVT  OIL COOLER  INSTALLATION  


PROCEDURE

Hide 33493C 1.INSTALL TRANSMISSION OIL COOLER ASSEMBLY

a.

Coat 2 new O-rings with Toyota Genuine CVT fluid FE and install them to the transaxle housing.

NOTICE:

Ensure that the O-rings are not twisted.



b.

Install the transmission oil cooler to the transaxle housing with the 3 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

Be careful not to damage the O-rings.



Hide 16290F 2.CONNECT NO. 3 WATER BY-PASS HOSE ASSEMBLY

a.

Connect the No. 3 water by-pass hose assembly to the transmission oil cooler and slide the hose clip to secure it.


Hide 16290F 3.CONNECT NO. 4 WATER BY-PASS HOSE

a.

Connect the No. 4 water by-pass hose to the transmission oil cooler and slide the hose clip to secure it.


Hide 4.ADD ENGINE COOLANT

Hide 5.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide 7.INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK

Hide 51442C 8.INSTALL ENGINE UNDER COVER LH

Hide 51451A 9.INSTALL CENTER ENGINE UNDER COVER