Home › Drivetrain › K320 (MULTIDRIVE / CVT) › SHIFT STROKE SENSOR
RM36W0E _52 Drivetrain _087836 K320 MULTIDRIVE / CVT _0422063 SHIFT STROKE SENSOR A

K320 MULTIDRIVE / CVT  SHIFT STROKE SENSOR  INSTALLATION  


PROCEDURE

Hide 89419B 1.INSTALL SHIFT STROKE SENSOR

a.
C435497

Coat the O-ring of the shift stroke sensor with Toyota Genuine CVT fluid FE.

NOTICE:

If reusing the shift stroke sensor, check that the O-ring is not damaged.



b.

Install the shift stroke sensor to the transaxle case sub-assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

Be careful not to damage the O-ring.



c.

Connect the shift stroke sensor connector.


Hide 17701 2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Hide 3.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE