Home › Drivetrain › K320 (MULTIDRIVE / CVT) › TRANSMISSION WIRE
RM36W0E _52 Drivetrain _087836 K320 MULTIDRIVE / CVT _0422071 TRANSMISSION WIRE A

K320 MULTIDRIVE / CVT  TRANSMISSION WIRE  INSTALLATION  


PROCEDURE

Hide 82125M 1.INSTALL TRANSMISSION WIRE

a.
C429258

Coat the O-ring of the transmission wire with Toyota Genuine CVT fluid FE.

NOTICE:

If reusing the transmission wire, check that the O-ring is not damaged.



b.

Coat a new O-ring with Toyota Genuine CVT fluid FE and install it to the temperature sensor.

NOTICE:

Ensure that the O-ring is not twisted.



c.

Install the transmission wire to the transaxle case sub-assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


d.

Connect the transmission revolution sensor (NC1) connector.


e.
C429259C01
0,0 0,0 false
V113147

Lock the lock lever


Connect the transmission wire connector and lock the lock lever.

HINT:

Make sure that the connector is locked securely.



Hide 35410J 2.INSTALL TRANSMISSION VALVE BODY ASSEMBLY