Home › Engine / Hybrid System › CRUISE CONTROL › CAMERA HEATER
RM36W0E _51 Engine / Hybrid System _088664 CRUISE CONTROL _0422125 CAMERA HEATER A

CRUISE CONTROL  CAMERA HEATER  INSTALLATION  


PROCEDURE

Hide 86401 1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
·
C406701C01
0,0 0,0 false
V100155

Inner Surface of Forward Recognition with Heater Hood Sub-assembly


Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.



a.

Engage the 2 guides and 2 claws as indicated by the arrows in the order shown in the illustration.

A464388C01
2.531,0.375 2.823,0.302 2.823,0.302 2.656,0.469 false 5.771,1.042 6.042,1.302 6.042,1.302 5.531,1.302 true 6.042,0.781 6.417,0.781 true 2.844,0.219 3.156,0.375 0.313,0.156 10 false *a 6.438,0.677 6.75,0.833 0.313,0.156 10 false *b 6.083,1.219 6.396,1.375 0.313,0.156 10 false *c 5.292,1.01 5.417,1.177 0.125,0.167 10 false 1 5.531,0.771 5.656,0.938 0.125,0.167 10 false 2
*a Guide *b Clamp
*c Rib - -
V100155

Heater Area
V113147

Install in this Direction (1)
V113148

Install in this Direction (2) - -


NOTICE:
·

Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.




b.
C406706C01
1.302,0.667 1.604,0.667 true 1,1.458 0.823,0.917 0.823,0.917 1.094,1.292 false 0.823,0.927 1.281,0.927 false 1.083,0.542 1.292,0.729 0.208,0.188 10 true *a 0.583,0.813 0.792,1 0.208,0.188 10 true *b 1.917,0.604 2.073,0.792 0.156,0.188 10 true 4 1.573,0.865 1.729,1.042 0.156,0.177 10 true 3 1.427,1.156 1.573,1.333 0.146,0.177 10 true 2 0.719,1.479 0.865,1.656 0.146,0.177 10 true 1
*a Clamp
*b Rib


Engage the clamp and 3 ribs to install the forward recognition with heater hood sub-assembly.

NOTICE:
·

As the No. 1 forward recognition cover cannot be installed correctly if the clamp and ribs are not engaged securely, make sure to engage each clamp and rib securely.

·

Do not forcibly pull the wire harness as it may become damaged.



HINT:

Engage the clamp and ribs in the order shown in the illustration.



c.

Connect the connector.


Hide 8646C 2.INSTALL FORWARD RECOGNITION CAMERA