8646C
1.INSTALL FORWARD RECOGNITION CAMERA
When replacing the forward recognition camera, replace it with a new one.
If the forward recognition camera has been struck or dropped, replace it with a new one.
If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.
Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.
Replace the forward recognition camera if there is any foreign matter on the camera lens.
If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-Lexus genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, lane control system, road sign assist system, pre-collision system, front camera system or lighting system (EX) may not operate properly due to a difference in the transmissivity or black ceramic border.
If the inner surface of the windshield glass in the area in front of the forward recognition camera is dirty, remove the forward recognition hood, clean the glass, then reinstall the forward recognition hood and forward recognition camera.
Forward recognition hood removal:
Click hereEngine / Hybrid System>CRUISE CONTROL>CAMERA HEATER>REMOVAL
Forward recognition hood installation:
Click hereEngine / Hybrid System>CRUISE CONTROL>CAMERA HEATER>INSTALLATION
Engage the 4 guides to install the forward recognition camera.
Do not touch the camera lens.
Connect the connector.
86464A
2.INSTALL FORWARD RECOGNITION LATCH
Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.
Engage the 4 guides and 2 claws to install the forward recognition latch.
86466D
3.INSTALL NO. 1 FORWARD RECOGNITION COVER
Engage the 2 clips and 2 guides to install the No. 1 forward recognition cover.
86466E
4.INSTALL NO. 2 FORWARD RECOGNITION COVER
Engage the 2 guides and 2 claws to install the No. 2 forward recognition cover.
5. UPDATE ECU SECURITY KEY
8646C
6.ADJUST FORWARD RECOGNITION CAMERA
If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.
Forward Recognition Camera Learning can be performed by using either One Time Recognition or Sequential Recognition or Driving Adjustment.
One Time Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>TARGET ADJUSTMENT(ONE TIME RECOGNITION)
Sequential Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION)
Driving Adjustment:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>DRIVING ADJUSTMENT