These DTCs are stored when a malfunction occurs in the Navigation ECU.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B1556 | Extension Module Malfunction 2 | When any of the following conditions is met:
·
Internal power supply malfunction ·
Internal hard drive malfunction ·
EEPROM error ·
Storage malfunction |
Navigation ECU |
When replacing the navigation ECU, always replace it with a new one. If a navigation ECU which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The navigation ECU may not operate normally.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are output | A |
| DTCs are not output | B |
A
B
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING