Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM36W0E _56 Audio / Visual / Telematics _088616 NAVIGATION / MULTI INFO DISPLAY _0422142 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B15AD  Navigation Processor Malfunction  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15AD Navigation Processor Malfunction When either condition below is met:
·

A short to ground, short to +B or open occurs in the gyro signal circuit

·

Gyro sensor malfunction


Navigation ECU

CAUTION / NOTICE / HINT

NOTICE:

When replacing the navigation ECU, always replace it with a new one. If a navigation ECU which was installed to another vehicle is used, the following may occur:

·

A communication malfunction DTC may be stored.

·

The navigation ECU may not operate normally.



PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs
50002 212

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Navigation System > Trouble Codes
50001 212

Result:
Result Proceed to
DTCs are output A
DTCs are not output B



A

B