88719A
1.INSTALL AIR CONDITIONER PRESSURE SENSOR
Remove the vinyl tape from the cooler refrigerant liquid pipe A.
Sufficiently apply compressor oil to a new air conditioner pressure sensor and the fitting surface of the air conditioner pressure sensor.
for Gasoline Model:
ND-OIL 8 or equivalent
for HV Model:
ND-OIL 11 or equivalent
| *a | Turn |
| *b | Hold |
Using a 27 mm deep socket wrench, install the air conditioner pressure sensor as shown in the illustration.
Connect the connector.
2.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
3. WARM UP ENGINE (for Gasoline Model)
4.WARM UP COMPRESSOR (for HV Model)
5.INSPECT FOR REFRIGERANT LEAK